2009 TITAN 48′ 2 AXLE WALKING FLOOR TRAILER
Base Model 48-2-TW-WF
Style Straight
Wall Configuration
Front To suit garbage application
Sides 7-14” + 1-6” To Suit garbage application
Rear Door Side swing, air release
Overall Length 48 ft
Overall Width 102” Nominal
Overall Height 13’ 1 ¼” Approximately
King Pin Location 36” WELD IN
Upper Coupler 5/16” THK – Set @ 48”
Number of Axles
PRIMARY Two (2)
Axles 5” Round -.580 Wall-Straight Spindle
Axle Track 77”
Suspension Watson Integra 30,000 lb @ 50”
Location of Spreads 29 ½” From Rear
Hub / Drum Assembly 10 Stud Duralite-Hub Pilot/Centrifuse Drum
Disc Wheel Size 9 x 22.5
Rims Aluminum-Polished Outer / Mill Inner
Tires Brand Michelin
Size 315/80R22.5
Tread XZUS
Ply 20
Quantity 8
Axle Layout FRONT-Primary-50-Primary-29.5-REAR
Oil Seals Chicago Rawhide
Lubricants Oil
Brakes ABS 2S1M Meritor Wabco
Slack Adj. Haldex Auto
Cam Enclos All Axles – c/w Dust Shields
Lift Kits None
Lift Controls None
Frame Width 48”
Rear Bumper Narrow, Aluminum, Flush
Option #1 Rubber Tipper Bumper T-Blocks
Option #2 D Ring style tow hooks
Tire Carrier None
Landing Gear STD. Jost Landing Gear
Top Rail Tapered H.D.
Top Cross Tube Qty 1 – Spring Steel (two piece style)
Floor Crossmembers 12” Centers X bracing required
Keith Walking Floor Kit Running Floor II – 3” ½” Dia Cylinders
Stal Model & Width 2299 (1914 CWS) 3 ½” (Center wear strip) T-Blocks Rear
Slat Wear Strips None
Continuous Bearing Continuous splash/hold down bearing full length
Side Wall Wear Plates Boomerang Style
Front Access Door STD-34w x 37h Sealed–Curbside Hinge w/flip step over air & electrical
Tarp Style None
Trap Header Flat – Front & Rear
Tarp Basket None
Trap Hooks None
Axle Fender None
Hyd Fitting
Pressure 1” Quick Coupler-Male (See Note #3)
Return 1” Quick Coupler-Female (See Note #4)
Mud Flaps
Style Titan Black Rubber
Location Rear
Mud Flaps – Landing Gear None
Paint Body – Color Natural Aluminum
Run – Gear Titan Black
Hub / Drum Same as Running Gear
Rims or Disc Aluminum
Light Package (Plug Form) All LED: 3 markers per side (includes corner mitre & midturn) At rear: 3 per side 4.5” dia in sill, & 5 rect. clearance at top
Access
Catwalk STD 24” Catwalk
J-Ladder-Front Roadside to catwalk with two rung style hand holds above
J-Ladder-Rear None
Steps-Front-Out None
Steps-Front-Ins None
Steps-Rear Located on driver side so door swings open as far as possible
Additional Specifications:
- KP to center of tandem must be 41’ or less.
- Ensure that the license plate holder has the half-moon step.
- Install 11’ hoses.
- Install hose hanger bracket on front wall for hoses.
- Mount (2) angles on top rail on roadside wall front & rear for Donovan 350 tarping system.
- List of repairs for U39D000176:
– Plate and cap bottom front panel
– Cut and reflare 1 stainless line at front panel, replace bulkhead fitting, replace both hydraulic hoses and couplers
– Pull floor slats out, remove old bearings, cut out and replace 4 crossmembers, repair others as needed
– Cut out and replace subdeck as needed, Heat and jack rear pan back into place
– Install new bearings, slats, bolt down floor, drill T-blocks, install and bolt down
– Replace cylinders and check valves, replace switching valve and control valve
– Repair section of rear post, Repair bottom panel on tailgate and overlay, replace 4 steps
– Cut passenger wall down through first 14″ and remove, clean and grind, replace 1st 14″ panel, reinstall top rail and 6″ panel and weld all
back in place
– Rebuild lock rod for rear door, replace linkage, reinstall and adjust
– Replace water seal and man door seals
– Replace spring bars, front upper gussets
– Cut out and replace rear header and gussets, install 5 new lights
– Overlay rear of inside walls, patch remaining hoses
– Install new bumper track and rubber bumper on rear of trailer, install new mudflaps
– Check all lights and repair/ replace as needed
– Replace 4 shock absorbers
– Make up and replace 3 brake chamber air hoses