2009 TITAN 48′ 2 AXLE WALKING FLOOR TRAILER
Base model 48-2-TW-WF (open top)
Style Straight
Wall configuration
Front To suit garbage application
Sides 7-14” + 1-6” to suit garbage application
Rear Door Solid, Sideswing, Manual
Overall length 48 ft
Overall width 102” nominal
Overall height 13’ 3 1/4” approx. at front
King pin location 36” weld in
Upper coupler 5/16” THK – set @ 48” high
Number of Axles Primary Two (2)
Axles 5” Round .580 Wall -straight spindle – See Note # 3
Axle track 77”
Suspension Recyo 21B @ 50” with inner wear pads & 3 leaf springs
Location of spreads 29.5” from rear
Hub/drum assembly 10 stud duralite-hub pilot/centrifuse drum
Disc wheel size 8.25 x 22.5
Rims Aluminum
Tires Brand Miscellaneous
Size 11R22.5
Tread 75%
Quantity 8
Axle layout FRONT-Primary-50-Primary-29.5-REAR
Oil seals Chicago Rawhide
Lubricants Oil
Brakes ABS 2S/1M Meritor Wabco
Slack adj. Haldex Auto
Cam Enclos All axles – c/w dust shields
Lift kits None
Lift controls None
Frame width 48”
Rear bumper Narrow, Steel, Offset, Push
Option #1 Tow hooks are incorporated into bumper
Option #2 None
Tire carrier None
Landing gear Std. Jost Landing Gear
Top rail Tapered H.D.
Top cross tube (less rear) Qty 1 – spring steel (two piece style)
Floor crossmembers 12” centers cross bracing required
Keith walking floor kit Running floor II – 3 ½” dia cylinders
Slat model & width 2299 (1914 CWS) 3 ½” (Center wear strip) – T blocks Rear
Slat wear strips None
Continuous bearing Continuous splash/hold down bearings full length
Side wall wear plates None
Front access door None
Tarp style PBR Style Tarp System – See Note # 4
Tarp header None
Tarp basket Tarp hoops front & rear
Tarp hooks Tarp hooks on 48” o/c with 4 hooks on rear door
Axle fender None
Hyd fitting Pressure 1” Quick Coupler – Male
Return 1” Quick coupler – Female
Mud flaps Style Titan black rubber
Location Rear
Mud flap – landing gear None
Paint Body – color Natural aluminum
Run – gear Titan Black
Hub / drum Same as running gear
Rims or Disc Aluminum
Light package 3 mks per side (includes corner mitre & midturn). At Rear: 3 per side 4.5” dia in light bar, & 5 rect. clearance at top
Access Catwalk None
J-Ladder Frt None
J-Ladder Rear Located in center of rear door
Steps Frt out None
Steps Frt in None
Steps Rear None
Additional specifications:
Estimated Weight: 18,230 lbs +/- 3%
Estimated Volume: 121.3 cu yds
REPAIRS AT KTR
Description….
– Unbolt and slide back middle section of slats
– Clean out king pin section and bearings, inspect subdeck
– Repair broken slat, install new bearings, slide floor back in
– Bolt slats back into place
– Replace T-blocks with good used set, bolt down with new hardware
– Repair bottom section on passenger side rear post
– Cut and remove top front gussets
– Repair top panel on front wall
– Weld on new front gussets
– Replace tailgate lock rod and adjust to close properly
– Patch over holes on inside and outside of trailer
– Run floor to check operation and for leaks, replace 2 leaking cylinders
– Remove roll pipe from tarp, cut off and replace bent section of tarp roll pipe, reinstall pipe and fasten
– Replace mudflaps on rear of trailer
– Acid wash trailer to blend in repairs
We’re located in Chebanse, Illinois, just off Exit 302 on I-57—perfectly positioned between Chicago and Champaign and just south of Kankakee. Whether you need trailer repairs, parts, or a new trailer, we’re easy to find and ready to help.
Not nearby? No problem. We can deliver your new or used trailer and parts within just a few days. If you’re further afield, give us a call to explore your options.