CONSIGNMENT SALE – ORIGINAL SPECS FROM THE MANUFACTURER
2009 MAC 40′ ALUMINUM HALF ROUND FRAMELESS DUMP TRAILER
BODY
LOAD PROFILE MATERIAL, 86 GVWR
LENGTH 40’ (0”)
FLOOR/SIDES ¼ Floor, ¼ Sides
FLOOR LINER None
BULKHEAD LINER None
RUBBER SEAL YES
TIRE CARRIER None
SUB FRAME WIDTH 102 in.
WALL HEIGHT 68”
REAR POCKET HEIGHT 69.75
HOIST 8-5-285 (41-42) 2500 SERIES
SIDE STEPS/LADDER LADDER OUTSIDE BOTH SIDES, STEPS INSIDE, D.S. STEPS INSIDE BOTH SIDES AT REAR. USE 3 X 3 ANGLE
BULKHEAD LADDER TUCK-AWAY LADDER D.S.
SHOVEL HANGER YES – PASSENGER SIDE FRONT
ALUMINUM ROLL CAP STANDARD (8 RISE ROLL) INSTALL UPPER SHOVEL BRACKET FOR HOSE HANGER
FRONT FENDERS WITH FLAPS NO
LIGHTS
LIGHT TYPE STD. TRUCKLITE LED WITH GROMMETS (ALL)
LIGHT PANEL 3 LARGE – 3 SMALL – 3 LARGE
LIGHT SHIELD/APRON ¼ X 6 LIGHT APRON
MARKER LIGHTS 5 EACH SIDE
BACK UP LIGHTS (1) PAIR LED BACK UP LIGHTS AND BACK UP ALARM
REAR POCKET LIGHTS LED, PAIR OF SMALL (MODEL10)
AUXILARY CABLE 7 WAY (ISO) BU WIRED TO YELLOW OF AUX PLUG
GATE
GATE HEIGHT 71.5 INTSALL RADIUS ANGLE ON GATE
GATE WIDTH 88.75
GATE SHEET THICKNESS 0.1875
GATE OPERATION BALL VALVES (STD.) NO HANDLE ON SIDE SWING PIN
HINGE TYPE O.S. SWING C.S. (NO GROUND CONTROL) – MOVE SIDE SWING PIN HOLDER TO DR SIDE OF SUBFRAME TOWER
COAL DOOR 12
CHUTE NONE
TARP HOOKS TAILGATE ONLY
SPREADER CHAINS NO
WINDERS/SAFETY LATCH WINDERS (1) EACH SIDE AND (2) BOTTOM – MOVE DR SIDE TOP WINDER BELOW REAR POCKET LIGHT
GATE LINER/INSULATION NO
SUBFRAME
MODEL 102 IN. WIDE CLOSED TANDEM
SUSPENSION HEND. INTRAAX AA-300TP – INTRAAX WAS 1,366 LBS.
PIN TO AXLE SETTING 433 IN.
SUSPENSION CONTROL BALL VALVE (STD)
AXLE SPACING 52 IN.
RIDE HEIGHTS 7.75 IN. SLOPE, 17, 17
AXLES AXLE FOR INTRAAX ONLY NY 25K RATING
ABS (1) 4S2M
BRAKE SHOES 7 XL, W/30-30 CHAMBERS
SLACKS HALDEX
TIRES (8) CONTINENTAL HSR 11R24.5 16 PLY
TIRE INFLATION SYSTEM NONE
AIR TANKS (STD.) (1) 12 IN TANK
RIM TYPE (PER AXLE) ALCOA HP 24.5 X 8.25 10 HOLE 2 MIL 2 POL DURA-BRITE PLANTINUM PERFORMANCE PLUS WITH PRO TORQUE NUT
HUB AND DRUM (4) CENT WITH DURA L HUB. HP OB 10 STUD TP, LS, 7
SYNTHETIC LUBRICATION YES, GREASE
HUBODOMETER 24.5, TP, GREASE, BOLT-ON STEMCO – DR SIDE FRONT
DUST COVERS YES
FLAPS REAR OF TIRES FULL ACROSS INCLUDE LOAD LEVEL INDICATOR WITH ANTI- SAIL BRACKET
FLAP FRONT OF TIRES FLAP (FRONT) INSTALL CENTER FLAP IN FRONT OF FRONT AXLE
AIR GAUGE/SYSTEM YES, IN FRONT – MOVE REAR FLAPS UP 1 HOLE
ENCLOSURE FOR SWITCHES STAINLESS STEEL WITH F.W.V. AND SWITCHES
PIN SETTING 16 IN. INSTALL TWO TOW HOOKS
DRAFT ARMS ALUMINUM
DOLLIES HOLLAND MARK V D.S. NOTE: THIS IS DROP AND HOOK ACCOUNT
HYD HOSE AND FITTING 1 X 120 HOSE WITH WING FITTING REINFORCE OVER LANDING LEGS AT LONGITUDINALS
5TH WHEEL PIN PLATE BREAK-AWAY PIN @ 51 IN. HIGH USE SOLID PIN IN DOLLY FEET
LIFT AXLE NONE
TARP NONE
PAINT
SUSPENSION COLOR MAC RED
PIN STRIPPING MAC RED
MAC LOGOS MAC RED – NO MAC LOGOS ON GATE
We’re located in Chebanse, Illinois, just off Exit 302 on I-57—perfectly positioned between Chicago and Champaign and just south of Kankakee. Whether you need trailer repairs, parts, or a new trailer, we’re easy to find and ready to help.
Not nearby? No problem. We can deliver your new or used trailer and parts within just a few days. If you’re further afield, give us a call to explore your options.