2015 MAC 48′ TIPPER TRAILER
BODY
Length: 48’
Width: 102”
Wall Height: 102”
Panel Type: (35) 2 ¼ x 15 ½ Vert. panels – (Buffed)
Top Rail Option: 2-1/4” Vert. Panel, top rail
Floor: ¼ with 3/8 last 10
Crossmember Spacing: 5 ¼” C/M, 10”
Rear Pocket Height: 115.125
Rubber Seal: Yes – Gate will be waterproof
Tarp Bar: None
Bulkhead Type: Smooth side bulkhead with 45 degree corners
Bulkhead Height: 108
Bulkhead Steps / Catwalk: Ladder only
Flaps, Rear Axle: Flap rear of tires, tarp hooks on outside of rear flaps
Flaps, Front Axles: Flap front of front tires
Upper Cross Tubes/Caps: (1) Spring-Mid
LIGHTS
Light Type: Grote LED w/ Grommet
Light Panel: 2 large – 3 small –2 large
Light Shield/Apron: 3/8 x 1 ½ full light shield
2 Marker Lights: 5 each side top and bottom
Midturns: 1 pair LED Bracket
Back-up Lights: None
Rear Pocket Lights: Pair of Small
Switch Enclosure: Polymer Box @ Dollies
Auxilary Cable: None
GATE
Gate Height: 103.5
Gate Width: 100
Gate Panel Type: Standard Vertical Panel
Gate Operation: Ball Valve -standard
Hinge Type: Overslung only
Safety Chain: No
Winders/Safety Latch: Winders (1) Each Side
Gate Steps: Ladder up Gate – Catwalk Platforms on each side of ladder gate
CHASSIS
Model: Tandem
Sub Frame Rails: (Std) Tandem 12” I-Beam (aluminum), 48 wide
Sub Frame Width: 47.25
Pin Setting: 36”
Tractor Drive Model: Tandem Drive
5th Wheel Plate: 3/8 low profile galvanized @ 48” high
Pin to Axle Setting: 513, 30 Rear Setting (24 Rear setting for alum bumper)
5th Wheel Plate Height: 47” High
Suspension: Hendrickson Intraax AA-250 TP – 16.25 Ride Height
Galvanized Suspension Hangers: No
Springs: Air
Axle Spacing: 52”
Suspension Control: Ball Valve
Axles: (2) Axle for Intraax only
ABS: (1) 2S1M Meritor/Wabco
Brakes: 7” XL, W/30-30 Chambers
Slacks: (Std) Gunite
Cam Guards (All Axles): Standard
Tires: Misc.
Tire Inflation System: Meritor System on all alxes
Rim: Alcoa 22.5 x 14.0 Super Single Polished (for XTE) Dura-Brite
Hub/Drum: (4) Cast w/ Steel Hub HP 10 Stud TP, LS, 7
Dust Covers: No
Dollies-Landing Gear: Jost-A451 – 10year No Lube – D.S. Reverse Mount
Registration Holder: Standard (Round) Holder
Air Guage/System: Yes, in Enclosure
Air Tanks: 12 Aluminum Air Tanks
Tow Hooks: (2) Two Tow Hooks
Bumper: Aluminum Bumper w/ Rubber Blocks
LIFT AXLE None
TARP
Tarp Manufacturer: Roll Rite Electric Tarp
Tarp Control: Electric – Tarp Mesh in center with Vinyl
Tarp Color: Black – Covering all 4 Edges
Weight: 14,219 lbs. +/-3%
Volume: 124 cu yds.
We’re located in Chebanse, Illinois, just off Exit 302 on I-57—perfectly positioned between Chicago and Champaign and just south of Kankakee. Whether you need trailer repairs, parts, or a new trailer, we’re easy to find and ready to help.
Not nearby? No problem. We can deliver your new or used trailer and parts within just a few days. If you’re further afield, give us a call to explore your options.