INVENTORY

2026 TITAN 53′ 2 AXLE WALKING FLOOR TRAILER         CALL FOR PRICING

Customer application               Garbage Application

Base model                                 53-2-TW-WF – Open Top

Style                                             Straight

Wall configuration

Front                   To Suit Garbage Application

Sides                   7-14” +1-6” panels to suit garbage application

Rear Door          Side Swing, Solid, Lights in Door, Air Release w/ Reinforced bottom lock finger – See Note # 7

Overall length                          53ft

Overall width                          102” Nominal

Overall height                         13’ 0-13/16” (156.8125”) approx.

King pin location                    36” WELD IN

Upper coupler                         5/16” THK Steel – Set at 48” high

Number of Axles   Primary    Two (2)

Axles                                         5” Round .580 Wall – Straight Spindle – See Note # 6

Axle track                                 77.5”

Suspension                             Titan/Eveley with inner & upper wear pads with 3 leaf springs

Location of spreads              See axle layout

Hub/drum assembly            10 Stud Duralite – Hub/Centrifuse Drum

Disc wheel size                       8.25 x 22.5

Rims                                        ALUM LVL Outer/Inner

Tires             Brand                Goodyear

Size                   11R22.5 – 41.4 dia

Tread                 Endurance RST

Ply                      16

Quantity            8

Axle layout                            FRONT – Prim -50 – Prim – 84 – REAR

Oil seals                                 To suit axles

Lubricants                             80W-90

Brakes         ABS                   2S/1M Meritor Wabco

Slack adj.          DRUM BRAKES: Meritor Auto

Cam Enclos     DRUM BRAKES: All Axles & c/w Dust Shields

Lift kits                                 None

Lift controls                         None

Frame width                        48”

Rear bumper                        Aluminum, offset, push w/ underride – See Note # 1

Option #1             Tow shackles

Option #2            Steel vertical blocks -protrudes 3 ½” sloped top bolted to bumper

Tire carrier                           None

Landing gear                      SAF-Holland Mark V: 105 Skid Foot, Standard hollow axle – See Note #1

Top rail                                Titan Tapered, V1

Top cross tube                    Qty 2 – Spring Steel (two piece style) – See Note #4

Floor crossmembers          12” Centers

Walking floor kit                Cargo CF600 HDC

Slat model & width            Cargo: 15 Slat: Double Ridge (Titan Extruded Slats), low friction seal, Aluminum endcaps

Slat wear strips                   48’ long, Flush, Filler bar wear strips

Continuous bearing            Twister Bearings (no continuous green bearings)

Side wall wear plates           Boomerang style

Front access door                 STD 35w x 37.5h Sealed – Curbside Hinge with flip step, located center

Tarp style                              None

Tarp header                          None

Tarp basket                           None

Tarp hooks                            Side hooks approx. 48” o/c with 4 hooks on rear door

Axle fender                            None

Hyd fitting   Pressure          1” Quick Coupler – Male

Return            1” Quick Coupler – Female

Mud flaps     Style                Titan black rubber

Location         (2) Behind Primary group & none at rear

Mud flap – Landing gear    None

Paint            Body – color     Natural aluminum

Run – gear        Titan black

Hub / drum      Same as running gear

Rims or Disc     Aluminum

Light package                         Front: (1) mkr per corner mitre.     Sides: (2) mkrs (includes midturn)      Rear: (5) mkrs at top, (3) 4” round red taillights per side in door

Access        Catwalk                Universal Roadside entry 24” catwalk

J-Ladder Frt        Roadside to Catwalk

J-Ladder Rear      Middle of Rear door full height – See Note # 3

Steps Frt out         None

Steps Frt in           None

Steps Rear            None

Additional specifications:

1. Approximately 39’ 9-1/2” from center of landing gear to rear of bumper
2. a) Add 9’ hoses to front wall        b) Add hinged lid hose hanger to front wall
3. Top stirrup step for front access ladder needs to be located approximately 20” down from top. Grab handle is still needed
4. a) Spring bars to be located 17’ from front and 17’ from rear        b) Prep Sidewalls at center for future spring bar
5. Air release tailgate controls to be located in control box
6. a) Invert axles                b) PSI ready axles
7. Tapered door header with 1-PC gusset attached to top side of tapered header. Gusset to suit 10” bolt on tarp header

Estimated weight: 19,100 lbs +/- 3%

Estimated volume: 135.49 cu yds