|
|
General Specifications:
Load capacity rated in 16' at normal highway speeds.
70,000 lb. 2 axle
Dimensions: |
| Overall Length: |
35' to 53' |
| Main Deck Lenght: |
17' to 35' |
| Upper Deck Length: |
8' |
| Width: |
8'-6" |
| Swing Clearance: |
80" |
| King Pin Setting: |
18" |
| Deck Height Unloaded: |
39-1/2" |
| Double Drop Unloaded: |
26" |
| Ground Clearance: |
10" |
- Frame: All steel MF-80 high tensile. Custom manufactured beams designed for stress loads at a minimum of two times rated capacity.
- Platform: 1-3/4" oak decking attached to every crossmember with two torx head screws. Load bearing wheel bolsters between each axle.
- Axles: (2) 25,000 lb.
- Brakes: 16-1/2" x 7" air.
- Wheels: 8.25 x 22.5 cast spoke.
- Tires: 255/70R x 22.5 low profile radials.
- Park Stand: Pin drop.
- Suspension: Spring type.
- "D" Rings" (10) 5 per side of deck bed. Chain slots in each bolster.
- Electrial: ICC DOT standard light and reflector kit.
- Paint: Trailer sandblasted, primed and painted one coat 2-part polyurethane.
- Warranty: Limited 5 Year Pro-Rated Major Structural Warranty (USA and Canada ONLY).
|
General Specifications: |
| TE70XT: |
70,000 lb. Distributed
40,000 lb. Concentrated in 10'
50,000 lb. Concentrated in 16' |
| TE80XT: |
80,000 lb. Distributed
50,000 lb. Concentrated in 10'
60,000 lb. Concentrated in 16' |
| TE90XT: |
90,000 lb. Distributed
60,000 lb. Concentrated in 10' |
| TE100XT: |
100,000 lb. Distributed
70,000 lb. Concentrated in 10' |
|
Dimensions: |
| Overall Length: |
40' to 53' |
| Main Deck Lenght: |
22'-3" to 35'-3" |
| Upper Deck Length: |
8' |
| Slope: |
1'-6" |
| Hydraulic Tail: |
11'-3" |
| Flip Under Ramp: |
5' allows 10 degree load angle |
| Deck Width: |
8'-6" |
- Frame: All hi-tensile steel. Custom manufactured beams designed for stress loads at a minimum of two times rated capacity.
- Platform: 1/1/2" Oak decking. 1/4" Steel tread plate covers the wheel area and over flip tail.
- Axles: (2) 22,000 lb. Capacity with oil seal hubs.
- Brakes: 12-1/4" x 7" air. Outboard drums with ABS, auto slack adjusters and spring brakes.
- Wheels: (8) 6.75 x 17.5 Disc wheels.
- Tires: (8) 235/75R x 17.5 Radials.
- Landing Gear: Pin drop.
- Suspension: Air ride with dump valve mounted by controls.
- Tie Downs: D-rings, stakepockets or Gotcha's on 4' centers.
- Storage: 1 Tool box with lid located upper deck driver's side front of trailer.
- Electrial: ICC DOT standard sealed beam light with mid-shop turn signal.
- Winch: 12,000 lb. Mounted front center of upper deck. Controls are located on driver's side of upper deck. 100' of 1/2" cable with cord type remote.
- Paint: Polyurethane primer and paint after sandblasting.
- Warranty: Limted 5 Year Pro-Rated Major Structural Warranty (USA and Canada ONLY).
|